Dali Wireless Transcend t43, Инструкция по установке и эксплуатации

Страница: 40 / 61

Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
40 Rev: 0-2
Nov , 2011
0
5.3.1 Gain Setup
5.3.1.1 DL Gain Setup
32. From the Function Explorer Tree on the left select
tHost™
unit. The
tHost™
main page will appear.
Note: tHost™ maximum input level with 0dB DL attenuation setting is -7 dBm. Absolute maximum
average power at DL input is 0 dBm, but DL attenuator shall be set to 1 to 7 dB (for levels from -6
to 0 dBm) to prevent saturation (overflow) of digital section. Hence, to achieve maximum average
power of 43 dBm, DL input signal range shall be between -7 dBm and 0 dBm of average power,
with tHost™ attenuator setting from 0 to 7 dB. Unit is designed for PAR of < 12 dB. An analog
protection circuit is enabled if DL input average power is higher than 0 dBm (by adding 30 dB of
attenuation).
33. Read “DL Input Power” (Pin) at a particular band, and calculate the DL Gain (G
DL)
you want to set (G
DL
=
Pout - Pin). Calculate initial DL attenuator value as Max. Gain (50 dB) – G
DL
(e.g. if Pin = -5 dBm, and
Pout=43 dBm, then G
DL
= 48 dB, and ATT
DL
= 2 dB)
34. Set DL Attenuator for particular band to calculated value. Click on “Set Parameters” button.
35. Repeat steps 33 and 34 until DL attenuation for all bands are set.
Figure 5-12
tHost™
Main Screen – Attenuation Setup
DAU
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
DL
UL
Alarm
On Off
On Off
System
Serial Number
Software Version Alarm
Set Parameters
Set Parameters
Configuration
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
Set Parameters
Set Parameters
Set Parameters
PCS
PCS
AWS
AWS
T-HostQS-Cw01
Status
Status
ON
ON
DL
UL
Alarm
On Off
On Off
Status
Status
ON
ON
DL
UL
Alarm
On Off
On Off
Status
Status
ON
ON
DL
UL
Alarm
On Off
On Off
Status
Status
ON
ON
Input DC Supply
V
-47.5
T-HostQS-Cw01
T-43D-S01
T-43D-S02
T-43D-C05
T-43D-C07
Net Config
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 40 of 61