Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
60
Rev: 0-2
Nov , 2011
0
9.1.3 LC Type Fiber Optic Connector
A small form factor ceramic based connector developed by Lucent.
Figure 9-3 LC Type Fiber Optic Connector
9.1.4 ST Type Fiber Optic Connector
Developed by AT&T, the ST connector (for Straight Tip) has been a perennial favorite for its termination simplicity
and low cost.
Figure 9-4 ST Type Fiber Optic Connector
Table 7-1 presents a typical assembly performance for ceramic ferrule based assemblies:
Table 9-1 Typical performance of ceramic Ferrule
Insertion Loss:
Return Loss:
Multimode PC finish
0.5 dB max.
>20 dB
Singlemode Super PC finish
0.30 dB max.
>42 dB
Singlemode Ultra PC finish
0.30 dB max.
>50 dB
Singlemode Angle (APC) finish
0.30 dB max.
>55 dB
9.2 Fiber Connector Cleaning Procedure
Use specially formulated solutions and lint-free wipes during cleaning process. Implement “wet to dry” process.
1. Apply a solvent to a small spot at the starting edge of a wipe.
2. Holding the end-face of the optical connector perpendicularly to the wipe, slide the end-face from the wet
spot to the dry zone.
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 60 of 61