Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
25
Rev: 0-2
Nov , 2011
0
4.3.1.2 t43™ Mounting On a Wall
Installation steps for
t43™
mounting on the wall are as follows:
1. Position support bracket on the mounting surface and mark the location of the six mounting holes;
or use the provided mounting template to do so.
2. Use a portable drill and 3/16” (4.7 mm) bit to drill through holes at the locations marked in Step 1.
3. Use a hammer to tap the three wall anchors into the holes.
4. Line-up the support bracket’s mounting holes with the anchors, and secure the bracket using six
screws and lock washers.
5. Position the unit so the hooks located on the unit back panel are aligned with four openings on
the supporting bracket. Insert and hang the unit.
6. Secure the unit using lock washer and screw that are provided.
Figure 4-3 provides exploded view and fully mounted view of the
t43™
on the wall.
Figure 4-3
t43™
Mounting On a Wall
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 25 of 61
