Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
53
Rev: 0-2
Nov , 2011
0
7 SYSTEM MAINTENANCE
7.1 Preventive Maintenance
7.1.1
tHost™
Fan Replacement
Tools required: Philips screwdriver
To replace the fan located at the back panel of the tHost unit please use following steps:
1. Undo four screws that are holding one of fan assembly in place. Please refer to Figure 7-1.
Figure 7-1 tHost Fan Replacement – Screws Location
2. Move the fan away from the back panel and remove protective grill with screws (as shown in Figure 7-2).
3. Pull out the cable to expose in-line connector.
Figure 7-2 tHost Fan Replacement – Grill Removal
4. Undo connector interface and discard old fan.
Figure 7-3 tHost Fan Replacement – Fan Removal
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 53 of 61