Daktronics GEN VI RADIO P1110, Руководство по установке

Страница: 9 / 34

Setting Radio Channels
5
Typical Radio Configurations
There are three different radio scenarios that can be accommodated: a single
controller system, a multiple controller system with a single broadcast group, and a
multiple controller system with multiple broadcast groups. Each of these configurations is
described in detail in the following sections.
Single Controller System
In a single controller system ( Figure 4 ), all radio receivers and all scoreboards receive
signal from the same console at all times. The default channel and broadcast group
settings on the receiver are not typically modified. An example of this type of system is a
football field with a scoreboard in one or both end zones displaying the same data.
BCAST 1, CHAN 01-08
to control a specific
scoreboard
BCAST 1-2, CHAN 01-02
to control a specific
scoreboard
BCAST 1-2, CHAN 00
to control a specific
broadcast group
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 2, CHAN 01
BCAST 1, CHAN 00
BCAST 2, CHAN 00
BCAST 1, CHAN 02
BCAST 2, CHAN 02
BCAST 0, CHAN 00
to control all at once
OR
BCAST 0, CHAN 00
to control all at once
OR
OR
BCAST 1, CHAN 08
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 2, CHAN 01
BCAST 1, CHAN 02
BCAST 2, CHAN 02
BCAST 1, CHAN 08
BCAST 1, CHAN 01
Figure 4: Single Control Console
Typically, all single controller systems will use the default setting BCAST = 1, CHAN = 1.
All radio receivers in the system must be set to the same values.
Display Action
The LCD will toggle between
these 2 screens:
RADIO SETTINGS
BCAST X CHAN YY
ENTER TO ACCEPT
CLEAR TO MODIFY
BCAST GROUP X*
RADIO CHAN YY
X = broadcast group number
YY = channel number
The LCD shows the current radio settings along with a prompt to
accept or modify these values.
If the radio settings are correct press <ENTER> .
If these values are incorrect, press <CLEAR> , and the LCD at
bottom left is shown, allowing edit of the channel or broadcast
group setting.
Broadcast Group Setting
[1] Use this setting for all single controller systems. Use the
number keys to edit this value and press <ENTER> to accept.
The asterisk will move to the channel setting.
Channel Setting
[1-8] Edit the channel number to the desired value and press
<ENTER> to accept. The CHAN switch on the receiver must
match this value.