Daktronics GEN VI RADIO P1110, Руководство по установке

Страница: 10 / 34

Setting Radio Channels
6
Multiple Controller System with Single Broadcast Group
In a multiple controller system with a single broadcast group ( Figure 5 ), there may be
one console for each scoreboard and/or one master controller that can run every
scoreboard at one time or take control of a specific scoreboard. An example of this type
of system is a softball complex with individual scoreboards on several different fields.
BCAST 1, CHAN 01-08
to control a specific
scoreboard
BCAST 1-2, CHAN 01-02
to control a specific
scoreboard
BCAST 1-2, CHAN 00
to control a specific
broadcast group
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
DAKTRONICS
PERIOD
HOME GUEST
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 2, CHAN 01
BCAST 1, CHAN 00
BCAST 2, CHAN 00
BCAST 1, CHAN 02
BCAST 2, CHAN 02
BCAST 0, CHAN 00
to control all at once
OR
BCAST 0, CHAN 00
to control all at once
OR
OR
BCAST 1, CHAN 08
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 1, CHAN 01
BCAST 2, CHAN 01
BCAST 1, CHAN 02
BCAST 2, CHAN 02
BCAST 1, CHAN 08
BCAST 1, CHAN 01
Figure 5: Single Broadcast Group
Multiple controller systems typically use Broadcast 1 and Channel 1 for the first controller
and Channels 2–8 for all remaining controllers. All radio receivers in the system must be
set to Broadcast 1 (BCAST 1).
Display Action
The LCD will toggle between
these 2 screens:
RADIO SETTINGS
BCAST X CHAN YY
ENTER TO ACCEPT
CLEAR TO MODIFY
BCAST GROUP X*
RADIO CHAN YY
X = broadcast group number
YY = channel number
The LCD shows the current radio settings along with a prompt to
accept or modify these values.
If the radio settings are correct press <ENTER> .
If these values are incorrect, press <CLEAR> , and the LCD at
bottom left is shown, allowing edit of the channel or broadcast
group setting.
Broadcast Group Setting
[1] Use this setting for all multiple controllers with single
broadcast group setups. Use the number keys to edit this value
and press <ENTER> to accept. The asterisk will move to the
channel setting.
Channel Setting
[1-8] Edit the channel number to the desired value and press
<ENTER> to accept. The CHAN switch on the receiver must
match this value.