Daktronics FB-2700 Series, Руководство по установке, Страница: 54 / 60

6.000
[152,4]
TYP. SPACING
REV DATE: BY:
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING
ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY
ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF
DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES.
COPYRIGHT 2018 DAKTRONICS, INC. (USA)
THIRD ANGLE PROJECTION
PROJECT:
OUTDOOR SCOREBOARD
TITLE:
P1647; LVX I-BEAM CLAMP MOUNTING
DATE:
18-MAY-18
DIM UNITS:
INCHES [MILLIMETERS]
SHEET REV
SCALE:
1/5 DO NOT SCALE DRAWING 1 OF 1 00
DESIGN:
KDRAGT
JOB NO. FUNC - TYPE - SIZE
3918361
DRAWN:
KDRAGT P1647 E - 07 - B
MOUNTING INSTRUCTIONS:
1. PLACE SPRING NUTS INTO SCOREBOARD
CHANNEL IN LOCATIONS SHOWN IN TOP VIEW
2. PLACE SPRING NUTS IN UNISTRUT IN
APPROXIMATE LOCATION OF VERTICAL BEAMS
2. LIFT SCOREBOARD INTO POSITION
3. MAKE SURE THE 1/2-13 BOLTS ARE AS
CLOSE TO THE I-BEAM FLANGES AS POSSIBLE
4. WHEN SCOREBOARD IS ADJUSTED TO
FINAL DESIRED POSITION, TIGHTEN
BOLTS FIRMLY
5. IF FLANGE THICKNESS IS MORE THAN 3/4"
THICK LONGER BOLTS WILL BE REQUIRED
AT THE CUSTOMER'S EXPENSE.
STANDARD MOUNTING METHOD
ALLOWABLE CAPACITY PER
COLUMN CONNECTION:
SHEAR = 185 LBS
TENSION = 2400 LBS
SHEAR AND TENSION LOAD
DIRECTION ARE AS INDICATED ON
REAR ISOMETRIC VIEW
***CRITICAL***
DO NOT USE ANY LUBRICANT
ON ANY MOUNTING HARDWARE
OR WARRANTY WILL BE VOIDED
STRUCTURAL NOTES
RECOMMENDED METHOD OF INSTALLATION:
- INSTALL 1 1/2" BOLT, 1/2" LOCK WASHER, 1/2" FLAT WASHER
USING SHALLOW SOCKET WITH EXTENSION.
- ENTER FRO MSIDE OF UNISTRUT SECURING INSIDE BOLTS
FIRST AND MOVING OUTWARD.
VERTICAL BEAM - FLANGE THICKNESS MUST BE 1/4" - 3/4"
1/2-13 X 3.000 BOLT - BOLT THREAD MUST ENGAGE ENTIRE DEPTH
OF SPRING NUT. BOLT MUST BE TIGHTENED TO 40FT-LB TORQUE
1/2" LOCK WASHER
1/2" FLAT WASHER
I-BEAM CLAMP - ASSURE CLAMP IS TIGHTLY ENGAGED
TO I-BEAM AND NUT
LONG SPRING NUT
SCOREBOARD
FRONT OF SCOREBOARD
TOP VIEW
EXPLODED REAR ROTATED VIEW
SPRING NUT
***CRITICAL***
MAKE SURE SPRING NUT
IS TURNED TO VERTICAL
POSITION INSIDE
UNISTRUT CHANNEL
I-BEAM CLAMP
1/2-13 X 3.000 BOLT
1/2" FLAT WASHER
1/2" LOCK WASHER
TENSION
SHEAR-X
SHEAR-Y
SCALE 1/8
3-1/4" UNISTRUT
VERTICAL BEAM
UNISTRUT
SCOREBOARD
I-BEAM CLAMP
1/2-13 X 3.000 BOLT
1/2" LOCK WASHER
1/2" FLAT WASHER
LONG SPRING NUT
SIDE VIEW
SCOREBOARD ATTACHEMENT
EXPLODED SIDE VIEW
UNISTRUT ATTACHMENT
SCALE 1/15
SEE DETAIL A
DETAIL A
SCALE 1/4
SHORT SPRING NUT
3-1/4" UNISTRUT
SCOREBOARD
1/2" FLAT WASHER
1/2" LOCK WASHER
1/2-13 X 1.500 BOLT
PPaarrtt ## -- 00AA--11664477--11007744 VVeerrssiioonn -- 0000..22 D Deessccrriippttiioonn -- LLVVXX II--BBEEAAM M M MTTG G;; PP11664477 FFBB EEXXTT,, 44 C CO ON NN NEEC CTTIIO ON NSS LLiiffeeccyyccllee SSttaattee -- FFuullll PPrroodduuccttiioonn LLaasstt M Mooddiiffiieedd BByy -- kkddrraaggtt LLaasstt M Mooddiiffiieedd -- 22001188--0055--2244