12
MAN#650508B
Voltage
Low voltage warning setup
Press and release the switch until “
VOLT
” is displayed, then press and hold the switch until the display blanks.
Release the switch. The display will
show “
LO
”, the current warning (9.0 – 12.1), and “
warning
”.
Press and release the switch to change the value, press and hold the switch to select it.
Display
Message display option menu
Press and release the switch until “
display
” is displayed, then press and hold the switch until the display blanks.
Release the switch. The display will
show “
contrast speed
” , “
contrast tach
”, “
prfm disp
”, “
digital
” , “
warn
” , “
MBm
disp
” , “
gauges
” , “
MBMs
”, or “
DONE
”.
Press and release the switch to change the selection, press and hold the switch to select it.
contrast
Message screen contrast adjust
Press and release the switch until “
contrast
” is displayed with “
SPEED
” for the speedometer display or “
TACH
” for the
tachometer display, then press and hold the switch until the display blanks.
Press and hold the switch to adjust the contrast. Each time the switch is pressed it will alternate between increasing and
decreasing the contrast. To exit, wait with no switch press for a few seconds.
prfm disp
Display performance readings
The performance readings are high speed recall, high RPM recall, 0-60 time, ¼ mile speed, and ¼ mile time.
Press and release the switch until “
prfm disp
” is displayed with the current setting (“
HIDE
”, “
SPEED
”, “
TACH
”, or “
BOTH
”). To
change the setting press and hold the switch until the display blanks.
Press and release the switch to change between the settings, press and hold the switch to select it.
digital
Display digital readings for all senders
The digital readings are automatically shown for any sender that does not have a gauge connected, but digital
readings for all senders can be selected to be shown.
Press and release the switch until “
digital
” is displayed with the current setting (“
HIDE
”, “
SPEED
”, “
TACH
”, or “
BOTH
”). To
change the setting press and hold the switch until the display blanks.
Press and release the switch to change between the settings, press and hold the switch to select it.
warn
Display gauge warning pop-ups
When one of the analog gauges is indicating a warning, the digital reading will automatically be shown on either the
speed or tach message display. The gauge it is displayed on is selectable.
Press and release the switch unti
l “
warn
” is displayed with the current setting (“
SPEED
” or “
TACH
”). To change the setting
press and hold the switch until the display blanks.
Press and release the switch to change between the settings, press and hold the switch to select it.
MBM disp
Display add-on MBM screens
When an add-on module is connected to the system the digital reading will automatically be shown on either the
speed or tach message display. The gauge it is displayed on is selectable.
Press and release the switch until “
MBm disp
” is displayed with the current setting (“
SPEED
”, “
TACH
”, or “
BOTH
”). To change
the setting press and hold the switch until the display blanks.
Press and release the switch to change between the settings, press and hold the switch to select it.
gauges
Display which analog gauges are connected
To troubleshoot display connections, the speedometer can indicate which gauges it sees connected.
Press and release the switch until “
gauges
” is displayed. The screen will show either a letter or a “-” for each gauge. “
R
” for
RPM
, “
F
” for fuel, “
V
” for volt, “
P
” for oil pressure, “
T
” for oil temperature, “
B
” for boost pressure, and “
A
” for air bag pressure.
MBms
Display which MBMs are connected and adjust warnings
To troubleshoot MBM connections, the speedometer can indicate which senders it sees connected.
Press and release the switch until “
MBMs
” is displayed. The screen will show either a letter pair or a “--” for each module.
Press and hold the switch to toggle through the available warning settings. (see the separate MBM manual for additional
details)
