18
English
8.2.3. Connecting refrigerant piping to the outdoor unit
•
#NNRKRKPIUHQTICUCPFNKSWKFQXGTHTQOVJGƂGNFEQPPGEVKQPRKRKPIMKV
CTGƂGNFUWRRNKGF
Front connection
Remove the slit hole of the piping intake and connect piping to the
piping intake.
5
4
2
1
3
4
Open the slit
hole here
1 Liquid pipe stop valve
2 Suction gas pipe stop valve
3 High/low pressure gas pipe stop valve
4 Filed connection piping kit (accessory)
5 Slit hole
5KFGDQVVQOEQPPGEVKQP
Remove the through hole cover on the bottom frame and lead out
the piping from the bottom frame.
1
4
6
7
3
2
8
5
1 Liquid pipe stop valve
2 Suction gas pipe stop valve
3 High/low pressure gas pipe stop valve
4 Filed connection piping kit (accessory) *
5 Through hole
6
.KSWKFUKFGRKRKPIƂGNFUWRRN[
7
5WEVKQPICUUKFGRKRKPIƂGNFUWRRN[
8
*KIJNQYRTGUUWTGICUUKFGRKRKPIƂGNFUWRRN[
* There are models without this accessory.
INFORMATION
#NNNQECNKPVGTWPKVRKRKPICTGƂGNFUWRRNKGFGZEGRVVJGCEEGUUQT[RKRGU
NOTE
2TGECWVKQPUYJGPEQPPGEVKPIƂGNFRKRKPI#FFDTC\KPIOCVGTKCNCU
UJQYPKPVJGƂIWTG
1
1
1
1
2
2
Ű
I
1 in. (25.4 mm)
>
I
1 in. (25.4 mm)
NOTE
• Be sure to use the supplied accessory pipes when carrying out pip-
KPIYQTMKPVJGƂGNF
•
$GUWTGVJCVVJGƂGNFKPUVCNNGFRKRKPIFQGUPQVVQWEJQVJGTRKRGU
the bottom panel or side panel. Especially for the bottom and side
connection, be sure to protect the piping with suitable insulation, to
prevent it from coming into contact with the casing generated.
%QPPGEVKQPHTQOVJGUVQRXCNXGUVQVJGƂGNFRKRKPIECPDGFQPGD[WU
-
ing accessory pipes supplied as accessory.
NOTE
Make sure that the onsite piping does not come in contact with other
piping, the bottom frame or side panels of the unit.
The connections to the branch kits are the responsibility of the installer
ƂGNFRKRKPI
8.2.4. Precautions when connecting piping between outdoor
WPKVUOWNVKRNGQWVFQQTWPKVU[UVGOU
• To connect the piping between outdoor units, an optional multi
connection piping kit (BHFP26P100U/BHFP26P100UA) and
reducer piping kit (KHFP26P100UA) are always required. When
installing the piping, follow the instructions in the installation manual
that comes with the kit.
• Only proceed with piping work after considering the limitations on
installing listed here and in the chapter 8.2. Connecting the refriger-
CPVRKRKPIQPRCIG|CNYC[UTGHGTTKPIVQVJGKPUVCNNCVKQPOCPWCN
delivered with the kit.
8.2.5.
2QUUKDNGKPUVCNNCVKQPRCVVGTPUCPFEQPƂIWTCVKQPU
• The piping between the outdoor units must be routed level or
slightly upward to avoid the risk of oil retention into the piping.
Pattern 1
Pattern 2
1
2
2
1
1
2
2
1
1 To indoor units
2 Piping between outdoor units
Prohibited patterns:
change to pattern 1 or 2
1
2
2
1
1
To indoor units
2
Piping between outdoor units
• To avoid the risk of oil retention to the outmost outdoor unit, always
connect the stop valve and the piping between outdoor units as
UJQYPKPVJGEQTTGEVRQUUKDKNKVKGUQHVJGƂIWTGDGNQY
B(1B0DLQB959B,0LQGG
