Daikin FVXG25K2V1B, Руководство по обслуживанию, Страница: 109 / 147

SiBE061121_A Troubleshooting
Service Diagnosis 99
4.24 Thermistor or Related Abnormality (Outdoor Unit)
Error Code
H9
,
J3
,
J6
,
P4
Method of Error
Detection This fault is identified based on the thermistor input voltage to the microcomputer.
A thermistor fault is identified based on the temperature sensed by each thermistor.
Error Decision
Conditions
„
The thermistor input voltage is above 4.96 V or below 0.04 V with the power on.
„ J3
error is judged if the discharge pipe temperature is lower than the heat exchanger
temperature.
Supposed
Causes
„
Disconnection of the connector for the thermistor
„
Defective thermistor corresponding to the error code
„
Defective heat exchanger thermistor in the case of
J3
error (outdoor heat exchanger
thermistor in cooling operation, or indoor heat exchanger thermistor in heating operation)
„
Defective outdoor unit PCB
Troubleshooting In case of “
P4
”
Replace the outdoor unit PCB.
P4
: Radiation fin thermistor
Caution
Be sure to turn off the power switch before connecting or disconnecting
connectors, or parts may be damaged.