Daikin FTKS20D3VMW, Руководство по обслуживанию, Страница: 201 / 355

Instruction SiENBE12-713
190 System Configuration
"
To change the air flow rate setting
5. Press “FAN setting button”.
• Indoor unit quiet operation
When the air flow is set to
“ ”
, the noise from the indoor unit will become quieter.
Use this when making the noise quieter.
The unit might lose capacity when the air flow rate is set to a weak level.
NOTES
DRY mode AUTO or COOL or HEAT or FAN mode
The air flow rate setting is not variable Five levels of air flow rate setting from “ “ to “ ”
plus “ ” “ ” are available.
"
Note on heat operation
•
Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes
smaller in lower outdoor temperatures. If the heating effect is insufficient, it is recommended to use another heating
appliance in combination with the air conditioner.
• The heat pump system heats the room by circulating hot air around all parts of the room. After the start of heating
operation, it takes some time before the room gets warmer.
• In heating operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system
switches into defrosting operation to take away the frost.
• During defrosting operation, hot air does not flow out of indoor unit.
"
Note on COOL operation
•
This air conditioner cools the room by blowing the hot air in the room outside, so if the outside temperature is high,
performance drops.
"
Note on DRY operation
•
The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It
automatically controls temperature and fan strenght, so manual adjustment of these functions is unavailable.
"
Note on AUTO operation
•
In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the room
temperature at the start of the operation.
• The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.
• If you do not like AUTO operation, you can manually select the operation mode and setting you like.
"
Note on air flow rate setting
•
At smaller air flow rates, the cooling (heating) effect is also smaller.