【INSTRUCTION MANUAL】
DAIKIN INDUSTRIES, LTD
.
SE-04430
【
6.Points for transporting, moving and installing
】
・
Though the vibration absorbed rubber is attached to the leg of the motor pump because of the low vibration and
low noise. It is fixed with a hexagon socket bolt (2 of M6 x L35) as to protect the vibration absorbed rubber
from transport vibration countermeasure at shipping.
■
Operation
・
Before operation, remove the hexagon socket bolt (2 of M6 x L35).
If it is operated without removing these bolts, it may cause loud vibration and noise.
■
Transporting
・
When it is being transported, install the spacer which
protect the vibration absorbed rubber with hexagon socket
bolt (2 of M6 x L35), and fix the motor pump and the tank
upper board securely. (Refer to the below figure.)
Be sure to suspend it with eyebolt.
In this time, move the unit carefully about balance so as
not to be damaged the piping by the hook.
Eyebolt
Detail of spacer
( 2 places )
Type
Weight
EHU14-L04
EHU25-L04
EHU25-L07
EHU25-M07
EHU30-M07
43kg
45kg
46kg
Weight table (hydraulic oil in not included)
9
Danger
・
If the vibration absorbing rubber is suspended without spacer for its protection, it is dangerous that the
vibration absorbing rubber may break off and fall.
・
In case that it is suspended except for the eyebolt (pump piping), it is dangerous to fall and turnover.
・
Confirm the weight of the hydraulic unit, and suspend it within the rated load of the hanger-hook.
Warning
・
Never approach during carry by hanger-hook. There is danger of injury due to fall and turnover.
Caution
・
Do not move the tank with filling oil. (The oil leaking and air-mixing will cause inferior operation.)
・
During transportation, be sure to fix it so that it may not be moved by vibration and another force.
Spacer
vibration
absorbed rubber
Hexagon socket bolt
(M6 x L35)