【INSTRUCTION MANUAL】
DAIKIN INDUSTRIES, LTD
.
SE-04430
Att.11
[Attached document B]
1-1 Without using pressure switch function
Supply(200v)
Start/stop signal
Pressure
Indication
Mode
Charge
Positioning
Normal control
Actual pressure
indication
Maximum 3.0
seconds
L: Operation order
H: Stop order
Alarm
L: Alarm condition
H: Condition without alarm
Actual pressure
indication
L: Waiting
Supply(200v)
1-2
With using pressure switch function
Pressure switch
setup
It may be precarious condition
because of relationship between
pressure switch setup and delay time
【
Start power supply, alarm system time chart
】
H: Operation ready
Maximum 10
seconds
Pressure
Indication
Mode
Alarm
Start/stop signal
L: Operation order
H: Stop order
L: Alarm condition
H: Condition without alarm
L: Waiting
H: Operation ready
Maximum 3.0
seconds
Maximum 10
seconds
Charge
Positioning
Normal control
Actual pressure
indication
Actual pressure
indication
1-3
With using pressure switch function (When operation stop after power on)
※
1.When it starts at start/stop signal ; When the start of the pressure is longer than output delay time
of pressure switch, alarm signal is outputted.
Supply(200v)
Pressure
Indication
Mode
Alarm
Operation ready
Pressure switch
setup
L: Operation order
H: Stop order
L: Alarm condition
L: Waiting
H: Condition without alarm
H: Operation ready
It may be precarious condition
because of relationship between
pressure switch setup and delay time
Maximum 3.0
seconds
Maximum 10
seconds
Normal control
Positioning
Charge
Actual pressure
indication
※
When “Operation ready output” is once outputted, output condition is kept until power off.
Operation ready
Operation ready