Daikin EHS157034 Скачать руководство пользователя страница 4

Страница: 4 / 64

Operating instructions

Daikin RoCon HP

Daikin Controller

008.1420844_13 – 02/2016

Safety

1.1 Observing instructions

These instructions are a >>

translation of the

original version

<< in your language.

All the activities required for operation and
setting the parameters are described in this in-
struction manual. All parameters needed for
trouble-free operation have been configured at
the factory.

●

Please read through this manual carefully
before operating the heating system or before
adjusting the settings for it.

●

Make a note of the preset values before you
make any changes to the unit configuration.

Relevant documents

– Daikin Altherma EHS(X/H):

– Installation and maintenance instructions
– Operating instructions for the user/owner
– Commissioning checklist

– External unit for Daikin Altherma EHS(X/H);

the associated installation and operating
instructions.

– When connecting to a solar system; the asso-

ciated installation and operating instructions.

– If a Daikin FWXV(15/20)AVEB is connected;

the associated installation and operating
instructions.

– If a different heater or optional accessories

are connected; the associated installation and
operating instructions.

The guides are included in the scope of supply
for the individual units.

1.2 Warning signs and explanation of

symbols

1.2.1 Meaning of the warnings

Warnings in this manual are classified according
into their severity and probability of occurrence.

DANGER!

Draws attention to imminent danger.
Disregarding this warning can lead to se-
rious injury or death.

WARNING!

Indicates a potentially dangerous situ-
ation.
Disregarding this warning may result in
serious physical injury or death.

CAUTION!

Indicates a situation which may cause
possible damage.
Disregarding this warning may cause
damage to property and the envi-
ronment.

This symbol identifies user tips and par-
ticularly useful information, but not warn-
ings or hazards.

Special warning signs

Some types of danger are represented by
special symbols:

Electric current

Risk of burning or scalding

Содержание EHS157034
































































Результаты поиска

Содержание EHS157034

Отзывы:

Бренды по названию

Популярные бренды

Daikin EHS157034, Руководство по эксплуатации

Результаты поиска

Содержание EHS157034

Отзывы:

Бренды по названию

Популярные бренды