manualshive.com logo in svg

Daikin EHS157034, Руководство по эксплуатации

Поделиться
Скачать
Daikin EHS157034 Скачать руководство пользователя страница 13

3 

x

 Operation

Daikin RoCon HP 
Daikin Controller
008.1420844_13 – 02/2016

Operating instructions

13

Displaying the water pressure

On the Controller RoCon HP, when it is switched on, you can 
display the system pressure (water pressure) in the internal 
circuit (direct heating circuit). The water pressure is available as 
the first info parameter after the operating data overview 

(see fig. 3-6).

The permissible range of water pressure during operation de-
pends on the Daikin Altherma EHS(X/H) and the heating system. 
The set values and threshold values must only be changed by the 
heating technician. If the water pressure falls below the minimum 
value (set parameter value), it must be increased by topping up 
the system (see installation instructions of the Daikin 
Altherma EHS(X/H), chapter "Inspection and Maintenance").

The pressure limits for the safety switch-off and the set 
pressure can be adjusted in the parameter settings in 
level 

"System "

.

Info

Overview

Water Pressure

T-HS

Water Pressure

Fig. 3-6

Info values display (e.g. system pressure)

3.4.2 Setting the operating mode

The selection of the operating mode with which the Daikin 
Altherma EHS(X/H) is to operate is undertaken on the rotary 
switch in the setting 

"Operating Mode"

 

.

The selected operating mode is activated by briefly pushing the 
rotary switch.

Operating Mode

Standby

Reducing

Operating Mode

Heating

Cooling

Summer

Operating Mode

Summer

Automatic 1

Automatic 2

Operating Mode

Summer

Automatic 1

Automatic 2

Fig. 3-7

Switching the operating mode 

(e.g.: from "Standby" to "Automatic 1")

●

Place the rotary switch in the 

"Operating Mode"

 

 

position.

An overview is displayed.

●

Select the desired operating mode with the rotary switch.

●

Confirm the changes with a brief push of the rotary switch.

Daikin Altherma EHS(X/H) operates in accordance with 
the set operating mode.

The current operating mode is indicated by an appropriate 
symbol in the standard display.

Operating mode Standby (Stand-by)

CAUTION!

A heating system that is not frost-pro-
tected can freeze in cold weather and be 
damaged.

●

Drain the water out of the heating 
system if there is a danger of frost.

●

If the heating system is not drained 
and there is a risk of frost, the power 
supplies must be secured and the 
external main switch must remain 
switched on.

In this mode, the Daikin Altherma EHS(X/H) is shifted to the 
stand-by mode. The 

frost-protection function

 

(see section 3.6.5) remains in place. In order to maintain this 
function, the system must not be disconnected from the mains!

Содержание EHS157034

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды