manualshive.com logo in svg

Daikin EHS157034, Руководство по эксплуатации

Поделиться
Скачать
Daikin EHS157034 Скачать руководство пользователя страница 16

Operating instructions

16

Daikin RoCon HP

Daikin Controller

008.1420844_13 – 02/2016

3 

x

 Operation

3.4.7 Switching time program

Various different timer programmes are available, that are set in 
the factory, but which can be adjusted to suit, to provide conven-
ient and individual room and hot water temperature control.

The timer programmes regulate the associated heating circuit, 
the storage tank charging circuit and an option connected circu-
lation pump in accordance with the stipulated switching times.

Adjustment

In the rotary switch position 

we set the time intervals for 

the heating circuit, the integrated hot water generation and the 
optional circulation pump.

●

Place the rotary switch in the 

"Time Program"

 

 

position.

An overview is displayed.

●

Select the timer programme to be set with the rotary switch.

●

Confirm the changes with a brief push of the rotary switch.

Settings are displayed.

●

Select and change the value to be set with the rotary switch.

●

Confirm the changes with a brief push of the rotary switch.

More detailed explanations and possible setting values for this rotary switch setting 
can be seen in chapter 6.8.

Permanent timer programmes

For the connected heating circuits and the storage tank charging 
circuit, timer programmes regulate the heating circuit tempera-
tures or the operating times for the circulation pump in ac-
cordance with the stipulated switching cycles. The switching 
cycles are saved in time blocks for which various set tempera-
tures apply.

In the switching cycles the heating system is regulated differen-
tiated into 

day

 and 

economy mode

.

The target room temperatures for these timer programmes are 
set in the rotary switch settings 

"Set Temp Day"

 

, "Set Temp 

Night"

 

 

and

 "DHW Set Temp 1"

.

The following switching time programmes are available:
–

2 timer programmes for the heating circuit

, each with 

3 possible time cycles
– [HC Program 1]
– [HC Program 2]

A separate input for each individual day of the week is 
possible, or in blocks of "Monday to Friday", "Saturday 
to Sunday" and "Monday to Sunday".

Programme

Time period

switching cycle

HC Program 1

Single day of the week

(Monday, Tuesday ...)

1st

.

2.
3.

06:00 -> 22:00

--:--  ->  --:--
--:--  ->  --:--

Working week

(Monday to Friday)

1st

.

2.
3.

06:00 -> 22:00

--:--  ->  --:--
--:--  ->  --:--

Weekend

(Saturday to Sunday)

1st

.

2.
3.

07:00 -> 23:00

--:--  ->  --:--
--:--  ->  --:--

Entire week

(Monday to Sunday)

1st

.

2.
3.

06:00 -> 22:00

--:--  ->  --:--
--:--  ->  --:--

HC Program 2

See HC Program 1

1st

.

2.
3.

See 

HC Program 1

Tab. 3-8 Menu structure heating circuit timer programme

Time settings for one switching cycle in one weekday or 
block programme are also adopted for other time pe-
riods, provided that they affect the same weekdays. 

Examples referring to tab. 3-8:

a) For the single working day "Monday" the start time 

for the 1st switching cycle changed from 06:00 to 
05:00.

In the time period "Working week" and "Entire 
week", the 1st. time block switching cycle also 
changed from 06:00 to 05:00.

b) For the time period "Weekend", the start time for the 

1st switching cycle changed from 07:00 to 08:00.

In the individual weekdays "Saturday" and "Sun-
day", the 1st switching cycle also automatically 
changed from 07:00 to 08:00.

c) For the time period "Entire week", the end time in 

the 1st. time block switching cycle changed from 
22:00 to 21:30.

In all the weekdays the 1st switching cycle is 
also changed from 22:00 to 21:30.

–

2 timer programmes for the hot water circuit

, each with 

3 possible switching cycles
– [DHW Program 1]
– [DHW Program 2]

The setting and input structure of the timer programmes 
are identical to the ones for the heating circuit timer pro-
gramme (see also tab. 3-8).

–

1 timer programme for one optionally connected 

circula-

tion pump with 3 individual possible switching cycles
– [Circulation Time]

The setting and input structure of the timer programmes 
are identical to those for the heating circuit timer pro-
gramme (see also tab. 3-8).

For further instructions concerning settings for an op-
tional circulation pump, see section 3.6.15.

Saved switching time programmes can be changed at any time. 
To provide a better overview, we recommend making a record of 
the programmed switching times and keeping it in a safe place 
(see chapter 9.1.1).

The permanent timer programmes are preset as per tab. 3-9.

Содержание EHS157034

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды