Daikin DCS004A71 Скачать руководство пользователя страница 51

Страница: 51 / 54

English

Problems

Possible Reasons and Solutions

The following dialog box appears stating that a communica-
tion error occurred, and I cannot operate the air condition-
ers from my PC.

The most likely causes are:
1. Your PC is not cabled correctly to the intelligent Touch Con-

troller.

2.The intelligent Touch Controller is turned off.

Clicking the OK button on the dialog box (Screen 1) displays the
Screen 2. Close your browser software and then restart it.

I cannot access the intelligent Touch Controller
web interface.

• Your PC is not correctly connected to the network.
• The intelligent Touch Controller address entered in the

browser is incorrect.

• The intelligent Touch Controller is turned off.
• The network is congested for any reason. In this case wait for

a while and then access it again.

When accessing the intelligent Touch Controller web
interface, the following screen appears.

• This message informs you that Java plugin is not installed or

the version of the installed Java plugin is not supported.
Install the correct version of Java plugin. Refer to “BEFORE
STARTING” for more information. (See page 3)

When accessing the intelligent Touch Controller web
interface, the following screen appears.

• This message informs you that your browser does not support

the frame function.
Check you browser’s specifications. Refer to “BEFORE
STARTING” for more information. (See page 3)

Screen 1:

Screen 2:

01_EN_EM05A059.fm Page 49 Wednesday, October 19, 2005 7:13 PM

Содержание DCS004A71























































Результаты поиска

Содержание DCS004A71

Отзывы:

Похожие инструкции для DCS004A71

Бренды по названию

Популярные бренды

Daikin DCS004A71, Руководство по эксплуатации

Результаты поиска

Содержание DCS004A71

Отзывы:

Похожие инструкции для DCS004A71

Бренды по названию

Популярные бренды