Daikin DCS004A71, Руководство по эксплуатации

Страница: 19 / 54

English 17
5-7 Starting/Stopping All the Devices in a Specific
Group
■ ■ ■ ■
Procedure for starting/stopping all the devices in a
specific group
Start or stop all the air conditioners included in a specific group.
This procedure can be used when devices in the selected group
are registered as “indoor unit,” “HRV,” or “Dio unit.”
This procedure supports both the Icon display and List display
modes. In the figure (Screen 1) the devices are displayed in the
Icon display mode.
[Procedure]
1. On the Main screen (Screen 1) select the zone which
includes a desired group from the zone tree area (1).
2. In the main display area (2) the groups belonging to that zone
appear. Select the group in this area.
3. The settings of the selected group appear in the setting area
(3). Displayed items vary depending on the category of the
group. For more information, see pages 12 to 15.
In the figure (Screen 2), an air conditioner group is selected.
Click the “ ” or “ ” button.
CAUTION
• In the Basic mode, clicking a button, such as the
“ ” and “ ”, immediately sends
your request to air conditioners and you cannot undo your
operation. Therefore be sure to click only an appropriate
button, especially when your operation target is a zone.
5-8 Starting/Stopping All the Devices in a Specific
Zone
■ ■ ■ ■
Procedure for starting/stopping all the devices in a
specific zone
Start or stop all the devices included in a specific zone.
This procedure supports both the Icon display and List display
modes. In the figure (Screen 1) the devices are displayed in the
Icon display mode.
[Procedure]
1. On the Main screen (Screen 1), select the “Monitoring (Zone
list)” item from the zone tree area (1).
2. The zone list appears in the main display area (2). Select a
desired zone in this area.
3. The setting area (3) changes to the zone setting area
(Screen 2).
• At this time, the “ ” tab is selected
if the selected zone includes air conditioners.
• The “ ” tab is selected if the selected zone
includes HRVs,
(When both types of devices are not included, no tab is
displayed.)
4. Click the “ ” or “ ” button.
CAUTION
• Clicking the selected button does not send your request.
If you want to send the Start request, click Stop and then
Start.
(1)
(2)
(3)
Screen 1: Main screen
Screen 2: Group setting area (air conditioners)
(1)
(2)
(3)
Screen 1: Main screen
(4)
Screen 2: Zone setting area
01_EN_EM05A059.fm Page 17 Wednesday, October 19, 2005 7:13 PM