－
6
－
3.3 Adjusting Welding Torch
Fig. 3.3 Adjusting Welding Torch
Note: Adjustment method is the same for the offset type torch (MWX-2001/MWX-3501).
3.4 Connecting Shook Sensor Cable (Option)
To connect the shock sensor unit and the shock sensor cable (AX manipulator: L9195B, before AX manipulator:
L6569A; option), an adapter cable (L6635B: option) is required.
Connect them as shown in Fig. 3.4.
For connection to the robot control, see the
instruction manual
(Installation and Maintenance) for Almega AX
series
.
Fig. 3.4 Connecting Shock Sensor Cable (option)
