-S7-
3. Notes on Use
3.1 Cooling water
CAUTION
●
Be sure to flow 1.2l/min or more of cooling water. (The water pressure
at the torch inlet shall be 0.1 ~ 0.3MPa or higher.) Insufficient amount
of running water may lead to damage of torch.
● Do not use the water-cooling torch with air cooling.
● Do not use a leaky welding torch as you may get an electric shock.
CAUTION
●
Before use, make sure that the electrode is stuck out of the nozzle tip
by 5 ~ 10mm. The nozzle may get damaged by arc heat if the
electrode tip remains inside the nozzle.
3.2
Cable hose
CAUTION
●
Do not let cable hoses touch any heated part of the welded, put
something heavy on top nor bend them excessively because the
welding torch might become damaged.
3.3 Replacement of Parts
CAUTION
●
To prevent burns, comply with the following cautions.
● Do not directly touch the high-temperature parts of a nozzle, an electrode and so on.
● When welding, wear suitable protection such as leather gloves for welding.
● Do not replace torch tip elements before they cool off.
CAUTION
●
If any parts are damaged, replace them with new ones for further
safety and better quality.
●Be sure to place an order for replacement parts at our sales office or our agency.
CAUTION
●
When grinding the electrode, be sure to wear the protective
glasses to protect your eyes.
●When you perform the grinding operation, follow the safety measures for grinder or
electrode grinding machine.
CAUTION
●
Be sure to turn off the servo power of the robot before replacing
or cleaning the parts (replacement of electrode, torch, etc.).
NOTES ON USE
