Daihen varstroj VARMIG 1605D PROFIMIG, Руководство пользователя

Страница: 8 / 24

7
3. MAIN PARAMETER
Note : The welding duty cycle is the percentage of actual continuous welding time that can occur in a ten
minute cycle. For example: 15% at 200amps- this means the welder can weld continuously at 200
amps for 1.5 minutes and then the unit will need to be rested for 8.5 minutes.
The duty cycle can be affected by the environment in which the welder is used. In areas with
temperatures exceeding 40
℃
, the duty cycle will be less than stated. In areas less than 40
℃
,
higher duty cycles have been obtained
All tests on duty cycles have been carried out at 40
℃
with a 50%. So in practical working conditions
the duty cycles will be much greater than those stated above.
MODEL VARMIG 1605D PROFIMIG VARMIG 2005D PROFIMIG
Power supply voltage 230 V ±10% 230 V ±10%
Function MIG TIG MMA MIG TIG MMA
Input current
max/eff.
26/14 A 19/11 A 29/16 A 35/16 A 27/12 A 31/14 A
Output current range 50-160 A 10-160 A 10-150 A 50-200 A 10-200 A 10-150 A
Duty cycle
(40
℃)
30% 160A 30% 160A 30% 150A 20% 200A 20% 200A 20% 160A
60% 113A 60% 113A 60% 106A 60% 115A 60% 115A 60% 92A
100% 88A 100% 88A 100% 82A 100% 89A 100% 89A 100% 72A
No load voltage 51 V 51 V
Efficiency >85 % >85 %
Idle state power
consumption
15 W 15 W
IP 21S 21S
Insulation class H H
Cooling way FAN & AIR FAN & AIR
Dimension 460x170x310 460x170x310
Wire diameter 0.6-0.8-1.0 Ø2.5,Ø3.2 0.6-0.8-1.0
Ø2.5,Ø3.2
Net weight 10 kg 10 kg