Daihen varstroj VARMIG 1605D PROFIMIG, Руководство пользователя

Страница: 12 / 24

11
3)
Note: Since the arc of MIG welding is much strong than that of MMA welding, please wear welding helmet and
protective clothing.
5.1.4.7 Connection of Shield Gas
Cev za plin, ki prihaja iz varilnega aparata, prikl jučite na r egulator
plina. Sistem za oskrbo s plinom vključuje plinsk o steklenico,
regulator plina in cev za plin. Cev za plin je treba vstaviti na
priključek na hrbtni strani stroja in ga s pomočjo obje mke za cev
priviti, da se pre preči puščanje ali vstop zraka in t ako zašč itite
mesto varjenja. Prosimo, up oštevajte:
1) Leakage of shielding gas affects the performance of arc
welding.
2) Avoid the sun shine on the gas cylinder to eliminate the
possible explosion of gas cylinder due to the increasing
pressure of gas resulted from the heat.
3) It is extremely forbidden to knock at gas cylinder and lay the
cylinder horizontally.
4) Ensure no person is up against the regulator, before the gas
release or shut the gas output.
5) For MIG-250GW and MIG-250GF, insert the power supply
plug of the heater into the 36 VAC (5A) socket on the back
panel of the welding machine.
6) The gas output volume meter should be installed vertically to
ensure the precisely measuring.
7) Before the installation of gas regulator, release and shut the
gas for several time in order to remove the possible dust on
the sieve to avail the gas output.