Daihen varstroj VARMIG 1605D PROFIMIG, Руководство пользователя

Страница: 7 / 24

6
BLOK DIAGRAM
LIFT TIG also called the contact type arcing TIG .
Needed items: inverter welder with LIFT TIG function, contact type MIG gun with one output power cable and
one air tube.
The use way of LIFT TIG is shown as below:
The output power cable connect with the negative output terminal, and the air tube connect with the gas meter
on the argon gas bottle. There is a nut cover on the air tube, which can connect with the gas meter. The thread
specification for the gas meter and the nut should be the same. Then open the valve of the argon gas bottle
and open the valve of the gas meter, we can control the gas flow by adjusting the gas regulating valve on the
TIG gun. Make the tungsten needle touch the workpiece, lift the TIG gun up by little, then we can see the
arcing.
INPUT
CONTROL