Dahua Network Video Server
User’s Manual
81
Figure 4-94
Check the box to enable iSCSI function and then input iSCSI server IP address and port.
The default port number is 3260.
Click Set path button, system pops up the path setup dialogue box. Please select the
connected path and then click OK button. See Figure 4-95.
Each path here stands for an iSCSI share disk. The path is already generated when it was
created on the server.
Figure 4-95
Input user name and password to set iSCSI path access right.
There are two situations:
When you set the iSCSI server, you have set corresponding user name or password
for a path. In this situation, you need to input user name or password to login.
When you set the iSCSI server, you have not set the corresponding access right. In
this situation, you can check the anonymous button or input customized user name.
Click add button, now you have added an iSCSI server. Click OK button, the setup is finish.
The interface is shown as in Figure 4-96.
