3
VCR O
PERATIONS
Normally in VCR mode (“VCR” icon on the front
panel lit), when your TV will show the VCR ’s
choice of output.When in TV mode (“VCR” icon
unlit) your TV will show its usual analogue
channels. Use this to watch an analogue TV
channel whilst your VCR is recording something
different.
One Touch Record. Starts an OTR to record the
current channel for 30 minutes. Each subsequent
press adds 30 minutes to the recording time, to a
maximum of 10 hours. Press STOP to end an OTR.
Slow-motion. When a tape is playing,this button
cycles through the 6 possible slow-motion speeds.
Stop /Eject. Stops a tape or ejects it if already
stopped.
Stop a tape while VCR is using.
Commercial Skip. Press then when a tape is playing
to fast-forwards 30 seconds.
Rewind. Starts the tape rewinding or playing
backwards. If already fast-backwards playing, each
subsequent press of this button changes the play
speed.
Play /Pause. Starts a tape playing, or pauses it
(freeze frame) if already playing. IF One-Touch
Recording, pressing this button pauses the
recording. Press REC to resume.
Forwards Wind. Starts the tape forwards-winding to
fast-forwards playing. If already fast-forward
playing, each subsequent press of this button
changes the play speed.
Programme Plus /Minus. Changes up or down a
channel when viewing Digital Satellite CH. Also
used for manual tracking when a tape is playing.
Audio /Video Source. Selects an external AV source
when choosing a channel to watch or record.
➠
13
Video RSatellite Receiver
3
VCR O
PERATIONS
Remote Control Buttons
➠
12
Video RSatellite Receiver
EJECT
INPUT
MUTE
TV / VCR
1
4
7
2
5
8
0
3
6
9
UHF
MENU
VOL
VOL
CH/TRK+
CH/TRK-
EXIT
REW
REC
SAT
AUDIO
INDEX
EPG
FREEZE
SLOW +
INFO
TV/RADIO
RECALL
30
STOP
FF
SP/LP
PLAY/PAUSE
Pg UP
Pg DOWN
TEXT
+
+
OK
/CH LIST
Display advanced information
about current CH. Turns on or off
the Tape Position information.
Display advanced information
about current CH in tape play or
REC mode. Only the tape position
itself is available when a tape is
playing (see “Tape information
display when playing a tape “
below) but more,including the tape
length and free space is shown
when the tape is stopped (see “Tape
information display when not
playing a tape ”).
Short Play /Long Play. Sets the mode
for the next One-Touch Recording.
Index Plus (Intro Scan). This winds
forwards through the tape, showing
you a few seconds of each
recording in turn. Press STOP or
PLAY to end it.
Index Minus (Intro Scan
Backwards). This winds backwards
through the tape, showing you a
few seconds of each recording in
turn. Press STOP or PLAY to end it.
For fast navigation, the numbers can
be used to enter and select channel
numbers on ANY screens showing
channel information. For two or
three digit channels, press the
buttons in succession.
Switches the system between
standby and on.
Used for digital text applications.
‘Yes ’ &‘No’ are also used to answer
on-screen questions.
Displays the programme guide.
Adjusts the volume, or moves to the
left or right item in the menu.
Confirms choices in menus or
displays programme list.
Clears on-screen information or
closes an open menu.
Selects alternative audio sound.
Switches between the current and
previously viewed channel. Also
will exit a digital text application
and return to normal viewing.
Get channel list from the selected
satellite when the channel list is on.
Get access to the TV Guide (or
Radio Guide) which provides
information on the current and next
programs on a channel.
Toggles TV/RADIO programme
mode.
Get test signal of selecting UHF CH.
Display the main menu.
Mute the sound.
Pauses freeze frame if TV or Radio
CH showing not playing.
