P
LAYING CASSETTES
➠
23
Video RSatellite Receiver
5
T
UNING IN NEW STATIONS
➠
22
Video RSatellite Receiver
6
SYSTEM SETTING
You can make misc settings on System Setting menu.
“Start on channel” Feature allows you to setup the first
shown channel when you power on the satellite receiver.
Optional :
If your set has RF Output, you may show 2 additional
menus related to RF channel selection.
Default UHF channel is 40.
Play
1
Push the cassette smoothly and squarely into
the cassette bay, with its windows pointing up.
2
Press [PLAY/PAUSE] to start playback.
3
Press [STOP] to stop playback.
4
Press [FF] or [REW] to fast forward or rewind the cassette from stop.
5
Press [STOP/EJECT] to eject the cassette in Stop mode.
• When you load a protected cassette such as pre-recorded film playback will start
automatically.
• When you are playing tapes of poor quality or tapes which have been recorded on
another machine, you can use the [PR+] or [PR-] buttons while the cassette is
playing to reduce horizontal interferences stripes.
• Playing NTSC tapes on PAL TV: If you play cassettes which have been recorded on
the NTSC colour system (as used in the USA), you can watch the pictures on most
PAL TVs.
On older TVs, some black lines may appear at the top and bottom of the screen.
The picture may also roll up or down. To prevent these problems adjust the V-
HOLD knob on your television.
NTSC : National Television Systems Committee.
Still
1
Press [PLAY/PAUSE] in Playback mode to still picture from playback.
2
Press [PLAY/PAUSE] to switch back to normal playback.
• After approximately five minutes on still, the cassette will automatically switch to
normal playback.
