Daewoo DSI-9300, Инструкция по эксплуатации

Страница: 17 / 22

➠ 31
Video RSatellite Receiver
8
➠ 30
Video RSatellite Receiver
V
ARIOUS
M
ENU
S
ETUP
M
ODE
N
ORMAL
T
IMER
R
ECORDING
9
PARENTAL LOCK
This function allows you to lock a channel with your password.
In order to prevent your children or any other person from accessing these channels,
you can also protect your installed data and information using Install Lock.
1
HOW TO CHANGE THE PASSWORD
1) Enter the current password.
2) Select Parental Lock to ON to activate the function.
3) Enter a new password.
4) Confirm your new password by entering the new
password again.
Note: Default password is 0000
Warning: Do not forget your password.
If you miss your password, you can use Masterkey (1250)
2
HOW TO USE PARENTAL LOCK
1) If you have activated the parental lock function, you
must choose the channels you want to lock.
2) Press [OK], then the lock symbol will appear.
3) Exit from this menu, and press the [
] button on the
remote control or the front panel.
To activate the Parental Lock function, you must switch
the Digital Satellite Receiver to stand-by mode at least once.
Turn on the Digital Satellite Receiver, and select a channel which is locked.
To watch the channel, enter your password.
• Often
You can press the [Left ], [Right ] or [OK] buttons to change how often you want the
timer to repeat. The choices are:
- Once : the timer will not repeat.
- Daily: the timer will repeat at the same time each day.
- Weekly: the timer will repeat on the same day of each week.
• Speed
You can press the [Left ] or [Right ] buttons to change what tape mode is used for you
recording. The choices are:
- SP: your recording will be made using Standard Play.
- LP: your recording will be made using Long Play.
When all the settings are correct, select the [OK] button.
The TIMER LIST screen will then be shown with your new timer highlighted.
Press the [Standby] button to put your video into standby. Your video will not record
unless you do this.
You can switch the video on again if you want to set the timer to record another
programme. Remember to put your video back into standby when you have finished
setting the timer.