2
I
NSTALLATION
➠
7
Video RSatellite Receiver
2
I
NSTALLATION
➠
6
Video RSatellite Receiver
This section explains the connection of the Digital Satellite Receiver VCR with various Video
devices. Refer to the manuals supplied with the equipment for the installation of outdoor
equipment such as the Satellite dish. When adding a new equipment, be sure to refer to the
related parts of the manual for the installation.
CONNECTING TO ANTENNA
CONNECTING TO TV
1
USING RCA SUPPORT
RS-232C
LNB. IN
S/PDIF
AUDIO
L
IN
R
VIDEO
LNB. OUT
ANT
OUT
Satellite Receiver
Satellite Dish
RS-232C
LNB. IN
AUDIO
L
IN
R
VIDEO
LNB. OUT
ANT
OUT
S/PDIF
TV
Satellite Receiver
RCA Cable
2
USING RF SUPPORT (Optional function)
Tuning procedure when RF connections are used
1 Select a channel number on the TV that is not currently used for other TV channels.
2 Follow the instructions in your TV manual to tune the TV channel selector to UHF channel
40.
3 If you are already using this channel, select another non occupied UHF channel between 21
to 69 on the TV. And then press the [UHF] button on this set’s remote control, you can see
the default UHF channel number on the set’s front display.
4 Using the [up/down] button, you can change your set’s UHF channel. When you have
correctly changed the UHF channel number you will see the vertical lines. If there is
interference from other channels, you can set the UHF channel number by pressing [OK] or
[EXIT] button.
RS-232C
LNB. IN
AUDIO
L
IN
R
VIDEO
LNB. OUT
ANT
OUT
S/PDIF
TV
Satellite Receiver
RF Cable
Satellite Dish
