➠
25
Video RSatellite Receiver
➠
24
Video RSatellite Receiver
7
R
ECORDING CASSETTES
Timer recording using EPG
The Digital satellite receiver provides an automatic system which makes it easier to set the
timer recording. EPG are shown in TV or Radio programme guides.
1
Insert an appropriate tape and position it correctly,
ready for recording. Press the [EPG] button and the
EPG menu will appear.
2
Press the [GREEN] button to show VCR record
Timer set.
3
Press the [OK] or [RED] button to enter the Edit
Entry. The Channel, Date, Start and Stop time will
then be filled in for the programme you have
chosen.
4
If you wish to change any of the settings:
• Move the select bar to the setting you want to
change using the [
…
] or [
†
] buttons.
• Change the setting using the [
œ
] or [
√
] buttons,or
the number buttons [0] to [9]. (For detailed
descriptions of all the settings and how they can be changed, please see the Normal
timer recording section.)
5
When all the settings are correct, select the [OK]
button. If you insert invalid data, you will see
message box.
6
The Timer List screen will then be shown with your
new timer highlighted.
7
Press the [
] button to put your video into standby.
Your video will not record unless you do this. You can switch the video on again if
you want to set the timer to record another programme. Remember to put your
video back into standby when you have finished setting the timer.
• If the broadcasting station doen’t send the EPG data signal, there can be the channel
without EPG data
6
P
LAYING
C
ASSETTES
Variable picture search
1
Keep pressing [FF] to vary the forward search speed.
2
Keep pressing [REW] to vary the rewind search speed.
Pressing the above buttons will vary the search speed in two speeds.
3
Press [PLAY] to switch back to normal playback.
Variable slow motion
1
Starting from playback you can keep pressing [SLOW-] or [SLOW+] to control slow
motion speed in six steps.
2
Press [PLAY] to switch back to normal playback.
Finding new recordings (index scan)
The video index search system allows you to find the beginning of any recording you have
made on your video. Your video automatically records index marks on the tape whenever a
recording is started.
1
Press [INDEX +] or [INDEX –] to search forwards or backwards.
The video will now wind to the beginning of a recording, play it for about 6
seconds, then wind on to the next one.
2
When you see the recording you want to watch, press [PLAY].
CM skip (commercial skip)
1
If you press [
√√
30] on the remote control during playback mode, tape advances for 30
seconds segment.
