Daewoo DSI-9300, Инструкция по эксплуатации

Страница: 16 / 22

➠ 29
Video RSatellite Receiver
➠ 28
Video RSatellite Receiver
8
N
ORMAL
T
IMER
R
ECORDING
8
You can then change the settings as follows:
• Enable
- Press the [LEFT] or [RIGHT] button to select [YES] or [NO].
- Select [YES] allows you to timer recording.
• Record Channel
- Press the [UP] or [DOWN] button and then select channel to want timer
recording.
- If you change to TV or Radio channel, press the [TV/RADIO] button in the
channel list.
- You can press the [OK] button to see channel list.
- Or, you can enter a channel number directly by pressing the [0 ] to [9 ] buttons.
- Or, you can edit the channel number by pressing the [Green ] button. A flashing
yellow cursor will be then shown. Pressing the [Up ] or [Down ] buttons will then
change the channel number appropriately. Press the [Green ] button again to
finish the edit.
- Or,you can press the [AV ] button to select an AV input. Each press of the button
will pick the next input in turn.
• Date or Day
- You can press the [Right ] or [Select ] buttons to move the date on by one day.
Press the [Left ] button to move the date back one day. Note, the day is shown
next to the date for your information.
- Or, you can enter the day part of the date directly by pressing the [0] to [9 ]
buttons. Note, the month and year are determined for you automatically.
- Or, you can edit the day part of the date by pressing the [Green ] button.
A flashing yellow cursor will then be shown. Pressing the [Up ] or [Down ]
buttons will then change the date appropriately. Press the [Green ] button again
to finish the edit.
• Start Time / End Time
- You can press the [OK] button to move the time on by numeric keypad dialog.
- Or, you can enter the time directly by pressing the [0] to [9] buttons. Note, to
enter 1.00am you must press ‘ 0100 ‘.
N
ORMAL
T
IMER
R
ECORDING
Insert an appropriate tape and position it correctly, ready for recording.
In the menu select the [On/off timer & Record timer] and then [VCR record timer] to
show VCR record timer set.
This screen lists all the timers that have been set. You may set up to a maximum of 8
timers.
If necessary, move the highlight bar using the [UP] and [DOWN] buttons until a
timer slot with ‘select bar’ is highlighted.
Press the [RED] or [OK] button to take you to the TIMER SET screen.
The current date and time are shown at the top of the screen.
You can select ENABLE, CHANNEL, OFTEN, DATE, DAY, START, END TIME and
TAPE SPEED.
Move the select bar to the setting you want to change using the [UP] or [DOWN]
buttons.