DAELIM A-FOUR -, Руководство по обслуживанию

Страница: 79 / 186

CLUTCH/DRIVEN PULLEY ASSEMBLY
●
Install new oil seals and O-rings on the movable driven
pulley face.
●
Lubricate the inside of the movable face with the
specified amount of grease.
GREASE APPLICATION : 5.0~5.5g
●
Install the movable face on the driven pulley face.
●
Install the guide pins, or guide pins and guide pin
rollers.
●
Install the seal collar.
●
Assemble the driven pulley, spring and clutch in the
clutch spring compressor. Compress the assembly by
turning the tool handle until the lock nut can be
installed.
●
Clamp the clutch spring compressor in a vise and
tighten the lock nut to the specified torque using the
lock nut wrench.
TORQUE VALUE : 4.0kgf
·
m
●
Remove the spring compressor.
●
Install the clutch/driven pulley and drive belt onto the
dirve shaft.
TOOL : CLUTCH SPRING COMPRESSOR
SOKET WRENCH 39mm
7-13
KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION