DAELIM A-FOUR -, Руководство по обслуживанию

Страница: 162 / 186

STARTER MOTOR
REMOVAL/INSTALLATION
REMOVE
●
Luggage box.
( 3-3 )
●
Center cover.
( 3-3 )
●
Floor side RH. cover.
( 3-4 )
●
Engine hanger side cover RH.
( 3-5 )
●
Disconnect the starter wire connector, remove the wire
from the wire fixing clamp.
●
Loosen the 2 starter motor fixing bolts.
●
Remove the starter motor.
●
Install in the reverse order of removal.
·
Accurately tighten the earth wire.
·
Turn off the main switch prior to servicing the starter
motor. If power is connected, the starter motor may
be activated and damaged.
DISASSEMBLY
●
Remove the starter motor screws and remove the motor
cover.
·
Record the order so the parts can be installed
correctly later.
INSPECTION
●
Check for continuity of the starter motor case.
-Between cord terminal“
⊕
” and bracket“
⊖
”: normal
if no continuity.
-Between cord terminal and brush (black wire) :
normal if there is continuity.
●
If abnormal, replace with a new one.
●
Measure the brush length. Replace the brush if it is
worn beyond the service limit.
SERVICE LIMIT : 3mm
15-4
STARTING SYSTEM
FIXING BOLT
STARTER MOTOR
WASHER SCREW
STARTER MOTOR
FRONT
BRACKET
BRUSH
BRUSH