DAELIM A-FOUR -, Руководство по обслуживанию

Страница: 57 / 186

5-5
FUEL SYSTEM
WASHER SCREW
AUTO BY STARTER
SET PLATE
AIR SCREW
THROTTLE
STOP
SCREW
GASKET
O-RING
FLOAT PIN
FLOAT
FLOAT
VALVE
FLOAT
CHAMBER
AUTO BY
STARTER COVER
AUTO BY
STARTER
FLOAT LEVEL
GAUGE
MAIN JET
THROTTLE
STOP SCREW
AIR SCREW
WASHER
O-RING
SLOW JET
FLOAT VALVE
FLOAT
CARBURETOR DISASSEMBLY/ASSEMBLY
●
Remove the auto by starter cover.
●
Loosen the 2 washer screws
●
Remove the auto by starter set plate.
●
Remove the auto by starter.
●
Remove the auto by starter O-ring.
●
Assemble in the reverse order of disassembly.
•
Install the auto by starter in the carburetor body after
applying grease to the starter O-ring and then tighten
firmly with set plate piece.
FLOAT CHAMBER/FLOAT/JET
DISASSEMBLY/ASSEMBLY
●
Loosen the 2 float chamber screws.
CHECK
●
Float valves and seats for cracks or damage.
●
Float valve operation.
●
Float valve level.
FLOAT LEVEL : 8mm
REMOVE
●
Main jet, needle jet holder, and needle jet, and remove
the slow jet.
●
Air screw, spring, washer, O-ring.
●
Throttle stop screw, spring, O-ring.