21
English
Installation Instructions
Installing the Rangetop, cont.
•
Disconnect power at the main circuit breaker or fuse box before making electrical connections.
•
BEFORE operating/testing, follow the grounding requirements (pg. 30) of this manual. Improper connec-
tion of the grounding plug is an electric-shock risk.
•
The electrical system (including power cord) is factory-installed/-wired. Altering any part of this system
may cause a short or overload.
1. Plug in the power cord. (Ensure the outlet meets all applicable electrical codes; see pg. 18.)
2. After installing the rangetop, check the gas-supply line to verify it was not damaged and remains
connected.
Assembling the Rangetop Burners
•
Do not operate the rangetop burners without all burner parts in place.
• To avoid electric shock, do not:
–
push in any burner controls while removing the burner.
–
remove the top or touch the electrode of any burner while another burner is on.
Making the Electrical Connections
1. Place the burner heads on their bases (see left). The elec-
trodes fit in the slot in the bottom of the heads, which
should lie flat.
2. Place the caps on their respective burner heads.