Dacor DHD30M967, Руководство по установке

Страница: 18 / 28

1 8 English
I nstallation Instruction s
Installing the Support Brackets
CRITICAL: To avoid alignment issues during final installation, the brackets must not be over/under/
off the centerline.
Hood Area
Bracket
placement
2 1/8"
Mounting block
(attached to studs
inside wall behind
hood)
Stud
Mounting bracket
(through wall board) to
mounting block
Line
indicates
hood top
Step 4
1
Marking the Centerlines and Brackets
2
Attaching the Brackets to the Wall
Holding-Bracket Centerline Distance
DHD Models A
30 12 1/2 in (31.8 cm)
36 7 1/8 in (18.1 cm)
48 17 in (43.2 cm)
1. Mark the holding bracket's horizontal centerline 2 1/8" (5.4 cm) below the top of the hood (Image 1). NOTE:
Minimum distance, bottom of cabinets to cooktop: 30" (76.2 cm).
2. Measure and mark the centerline (Image 1) halfway between the cabinets. (If there are no cabinets above
the cooktop, measure and mark the cooktop centerline.)
3. Referring to Image 1 and the above table, measure the "A" distance left and right from the centerline
between the cabinets (or the cooktop centerline), and mark the holding brackets' centerlines.
4. Lay the bracket against the wall, and align the screw holes with the horizontal centerline. (Use anchors/
screws that can support the hood; be sure to properly reinforce the drywall.)
5. Mark the two holes in the bracket.
6. Drill those two holes for screws and anchors.
7. Attach the brackets securely to the wall.