Dacor DHD30M967, Руководство по установке

Страница: 19 / 28

English
1 9
Installation Instruction s
Rotating the Blower s for R ear E xhaust
IMPORTANT: Perform this procedure before hang the hood.
WARNING
•
Ensure the electrical service meets the hood’s specifications.
• Observe all local codes during installation. Con sul t the local building department if needed .
•
The hood must be installed by a qualified technician with sufficient personnel to assist.
•
The owner is ultimately responsible for the hood's proper installation.
B
Rear
Exhaust
The hood comes from the factory in the top-exhaust
configuration (Fig. 1) ; if you intend to use that
configuration, you do not need to alter the blower’s
position. If, however, the hood will be installed for
rear exhaust, the blowers can be rotated so exhaust
vents out the back (Fig. 2) .
NOTE: The hood images in this section were chosen to illustrate procedures and may not depict the
hood being installed.
Tools Needed
5/16” nut driver
Cable ties
• AHT10 Transition kit (option), metal screws, foil tape
•
10” ducts, ducting material
8” duct and ducting materials
Phillips screwdriver
Removing Components
1. Unhook and remove the grease channel.
2. (Taking care not to scratch the hood) Place the
hood assembly on a large, flat surface.
Duct Collar (top of hood)
Back of Hood
3. Remove the duct collar from the hood top.
(Save the collar and screws.)
Top
Exhaust