Dacor DHD30M967, Руководство по установке

Страница: 13 / 28

English
1 3
Installation Instruction s
Installing the Electrical Source
In compliance with local codes, install an electrical junction box near the hood’s wiring access holes.
Hood
Suggested Junction
Box Area
1. In the cabinet or wall, drill 7/8” holes through
which to pass the electrical wiring.
2. See the wiring diagram on the last page of this
manual.
Meeting Installation Requirements
•
The hood must be at least as wide as the cooktop.
•
All dimensions must fall within specified minimums.
•
Dimensions given are minimum clearances unless otherwise noted.
•
All contact points between the hood and cabinetry/walls must be sturdy, solid, and at right
angles.
•
Install the hood so it can be removed for service.
WARNING
Follow local codes during planning/installation. Contact the local building department for details.
Use only code-approved ductwork.
IMPORTANT: See the diagram on pg. 17 for the minimum installed distance from hood to cooktop
surface. This distance depends on the range or cooktop in use. Check the manufacturer's
specifications for the cooktop or range.