Dacia 1304 2004, Руководство по ремонту

Страница: 187 / 654

COOLING - EXHAUST - FUEL TANK
19
19 - 16
PARTICULARITIES
The electric fuel pump (picture
2
) is fixed on the tank,being immersed in fuel and is commended
by the computer,by means of the fuel pump relay (
R1
). When contact is on,with the key in the
position
M
(engine),but without starting the engine,the pump will be fed with electricity only for
3-4 sec.The pump will permanently flow only when the computer is receiving signal from the
rpm sensor and must ensure a minimum flow of
1 - 1,1 l/min
.and a pressure of
1-1,1 bars
at 12 V. The cause of an insufficient flow may be the
low feeding tension of the pump or a dirty fuel filter.
In case it is defective the pump is not to be repaired but replaced.
ATTENTION!
In the feeding system,the fuel remains under pressure even after stopping of the
engine; in case of hoses disconnecting,place a cloth material next to the connection so
that fuel does not reach the hot areas of the engine.
The flow measurement is done as follows:
- connect the return from the injector valve body to a hose which will flow fuel in a
gauged vessel of 2000 ml;
- feed directly the pump during 1 minute,starting the engine or by by-passing the connector
30
and
87
of the fuel pump replay (
R1
),with the engine stopped and contact off.
ELECTRIC FUEL PUMP
vnx.su