Dacia 1304 2004, Руководство по ремонту

Страница: 429 / 654

44
REAR UPPER STRUCTURE
D
ISMO UNTING
Dismount the elements which are in
contact with the side panel.
Detach the welding points of the side
panel (
1
) which are in connection with:
- middle pillar in the area (
2
);
- floor side plate and front extensor
lower edge in the (
3
) area;
- the rear side plate and rear extensor
lower edge in the area (
4
);
- the platform floor in the area (
5
);
- the cabin side plate in the area (
6
).
Straighten the areas resulted by
dismounting.
Grind the areas resulted by dismounting.
R
EMO UNTING
Apply a layer of
5322
material on the
joints areas (
7
) of the side panel with: front
/ rear extensor, lower panel, side plate, rear
side floor cabin, rear plate.
Position and center the new element.
Check the correct positioning of the side
panel .
Weld the lateral panel (
1
) following the
assembling outliners
2
,
3
,
4,5,6
.
Apply a sealant material layer
PLASTISOL 4
in the joint area (
8
) of
the side panel with : rear side floor, rear
lamp lining, front/rear extensor, wheel pas-
sage, cabin separating wall.
SIDE PANEL DACIA 1304 PICK - UP, 1307
44 - 1
1
6 5
2
3
4
7
Rear plate
8
vnx.su