Dacia 1304 2004, Руководство по ремонту

Страница: 71 / 654

10
10 - 37
ENGINE AND LOWER ENGINE UNITS
Check the diameter of the depressed guiding:
- nominal value 11 mm ;
-
value 1-st repair
11,1 mm ;
-
value 2-nd repair
11,25 mm ;
NOTE: The guiding at the repair value are supplied only by request
R
EMOUNTING
Turn the cylinder head on the support plate
and bore the seat of the guide at the
correspondening value of the new guie.
Introduce the chuck (
1
) in the lock bushing
(
2
) (at one or the other side,depending on the
guiding being pressed) and the guiding is placed
on the end of the chuck (
1
).
Lubricate the uiding with oil and press it with
a hydraulic press observing the followings values:
- Inlet A = 26,5 mm ;
- Oulet B = 26,2 mm .
These values are obtained during pressing; if
in the moment when the shoulder of the chuck
(
1
) reaches close the limiting bushing (
2
),the latter
is rotated until it comes into contact with the
chuck.
DISMOUNTING – MOUNTING
vnx.su