Dacia 1304 2004, Руководство по ремонту

Страница: 481 / 654

AIR CONDITIONING
62
62 - 9
COMPRESSOR
R
EMOUNTING
Position the compressor on the attachment supports.
Tighten the compressor on the supports, by means of 3 screws, which are to be initial screwed
in the following order : front upper left, rear lower right, front lower left.
Position and tighten the tie rod on the compressor upper support and on the cylinders hous-
ing.
Screw and tighten at the required moment the compressor attachment screws in the following
order : front upper left, front lower left, rear upper right, rear lower right
(
3,5 daNm
).
Tighten at the required moment the tie rod attachment screw on the cylinder housing ( 3,5
daNm ).
Mount and tension the alternator belt by acting upon the tightener screw (see chapt.
” Belts tightening checking and tensioning “), then lock it, by tightening the tightener nut at the
required moment (
3,5 daNm ).
Tension the alternator belt (see chapt.”Belts tightening checking and tensioning “) and tighten
at the required moment ( 1,25 daNm ) the alternator clamp attachment nut. and the clamp for
alternator belt tightener.
Tighten at the required moment the alternator attachment screw on the support
( 2,4 daNm ).
Mount the pipes to the compressor and tighten them at the required moment ( 2,5 daNm ).
ATTENTION !
The compressor – evaporator pipe of ˚”, is the suction pipe, and the compressor –
condenser pipe of 13/32 ”, is the discharging pipe ( in case mounting is not correct, the
system is not working).
Fill the refrigerant circuit and check the climate control system operation.
NOTE : When compressor is replaced, obligatory replace also the tank filter.
vnx.su