Dacia 1304 2004, Руководство по ремонту

Страница: 420 / 654

UPPER FRONT STRUCTURE
42
42 - 2
FRONT UNIT CARRIAGE BODY
REPLACEMENT
This operation shall be performed only on the repair bench. For the specific supports
mounting on the bench, please see the 40 chapter.
D
ISMO UNTING
Dismount the damaged elements, which are
in contact with the front part body.
Perform a checking redressing on the check-
ing/repairing bench, until bringing the carriage
body almost at the initial shape.
Detach the welding points from to front part
of carriage body as follows :
- in ( 2 ) joining area of the front longitudinal
girders with the pedal floor;
- in (
3
) joining area of the front longitudinal
girders with the left / right lateral cross bar;
- in (
4
) joining area of the front longitudinal
girders with the intermediary longitudinal girders;
- in ( 5 ) joining area of the front wing
linings with the iron plate;
- in ( 6 ) joining area of the cover reinforce-
ments and climate control box;
- in ( 7 ) joining area of the front wing
linings with the front pillar linings;
- in (
8
) joining area of the front longitudinal
girder with the iron plate.
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
R
EMO UNTING
Position and center the new element on the
repairing bench.
Check the correct positioning of the front unit
carriage body.
Weld the front unit carriage body (
1
) following
the assembling outliners
2,3,4,5,6,7,8,9,10
.
Protect the new element with a corrosion
preventing and noise absorbent product.
1
7
6 5
8
4
2
3
vnx.su