DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
192
22-2 delete link_aggregation group_id
Purpose
Used to delete a previously configured link aggregation group.
Format
delete link_aggregation group_id <value 1-5>
Description
The
delete link_aggregation group_id
command is used to delete a previously configured link
aggregation group.
Parameters
Parameters
Description
group_id
The specifies the group ID. The group number identifies each of the groups.
The switch allows up to five link aggregation groups to be configured.
Restrictions
You must have administrator privileges.
Example
To delete a link aggregation group:
D G S - 3 2 0 0 - 1 0 : 4 # d e l e t e l i n k _ a g g r e g a t i o n g r o u p _ i d 3
C o m m a n d : d e l e t e l i n k _ a g g r e g a t i o n g r o u p _ i d 3
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
22-3 config link_aggregation
Purpose
Used to configure a previously created link aggregation group.
Format
config link_aggregation group_id <value> {master_port <port> | ports <portlist> | state
[enabled|disabled]}
Description
The
config link_aggregation
command allows you to configure a link aggregation group that was created
with the
create link_aggregation
command above.
