D-Link xStack DES-3800 Series, Руководство CLI

Страница: 253 / 326

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
248
config ospf ipif
state [enable | disable] – Used to enable or disable this function.
active | passive – This parameter is used to assign the designated
entry to be an active or passive interface. The default is active .
Restrictions Only administrator-level users can issue this command.
Usage Example
To configure OSPF interface settings:
DES-3800:4#config ospf ipif System priority 2 hello_interval 15
metric 2 state enable
Command: config ospf ipif System priority 2 hello_interval 15
metric 2 state enable
Success.
DES-3800:4#
show ospf ipif
Purpose Used to display the current OSPF interface settings for the
specified interface name.
Syntax
show ospf ipif {<ipif_name 12>}
Description This command will display the current OSPF interface settings for
the specified interface name.
Parameters
<ipif_name 12>
−
The IP interface name for which to display the
current OSPF interface settings.
Restrictions None.
Usage Example:
To display the current OSPF interface settings, for a specific OSPF interface:
DES-3800:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: ipif2 IP Address: 123.234.12.34/24 ((Link Up)
Network Medium Type: BROADCAST Metric: 1
Area ID: 1.0.0.0 Administrative State: Enabled
Priority: 1 DR State: DR
DR Address: 123.234.12.34 Backup DR Address: None
Hello Interval: 10 Dead Interval: 40
Transmit Delay: 1 Retransmit Time: 5
Authentication: None
Total Entries: 1
DES-3800:4#