D-Link xStack DES-3800 Series, Руководство CLI

Страница: 216 / 326

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
211
config route redistribute dst ospf src
destination’s interface cost to the metric entered in the Metric
field.
•
Type-2 uses the metric entered in the Metric field without
change. This field applies only when the destination field is
OSPF.
metric <value 0-16777214 >
−
Allows the entry of an OSPF interface
cost. This is analogous to a Hop Count in the RIP routing protocol.
Restrictions Only administrator-level users can issue this command.
Routing information source
−
RIP: the Static Route table, and the Local interface routing information.
Routing information will be redistributed to OSPF. The following table lists the allowed values for the
routing metrics and the types (or forms) of the routing information that will be redistributed.
Route Source Metric Metric Type
RIP 0 to 16777214 mettype 1
mettype 2
Static 0 to 16777214 mettype 1
mettype 2
Local 0 to 16777214 mettype 1
mettype 2
Allowed Metric Type combinations are mettype 1 or mettype 2 . The metric value 0 above will be
redistributed in OSPF as the metric 20 .
Example Usage:
To configure route redistributions:
DES-3800:4#config route redistribute dst ospf src all metric 2
Command: config route redistribute dst ospf src all metric 2
Success.
DES-3800:4#
config route redistribute dst rip src
Purpose Used configure route redistribution settings for the exchange of
RIP routes to OSPF routes on the Switch.
Syntax config route redistribute dst rip src [ local | static | ospf { all |
internal | external | type_1 | type_2 | inter+e1|
inter+e2}
]{metric <value 0-16>}
Description Route redistribution allows routers on the network that are running
different routing protocols to exchange routing information. This is
accomplished by comparing the routes stored in the various
router’s routing tables and assigning appropriate metrics. This
information is then exchanged among the various routers
according to the individual routers current routing protocol. The
Switch can redistribute routing information between the OSPF and
RIP routing protocols to all routers on the network that are running