D-Link xStack DES-3800 Series, Руководство CLI

Страница: 70 / 326

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
65
show log
Purpose Used to display the switch history log.
Syntax show log index <value 1-65535> >
Description This command will display the contents of the Switch’s history log.
Parameters
index <value 1-65535>
−
This command will display the history log,
beginning at 1 and ending at the value specified by the user in the
<value 1-65535> field.
If no parameter is specified, all history log entries will be displayed.
Example usage:
To display the switch history log :
DES-3800:4#show log index 5
Command: show log index 5
Index Time Log Text
----- ------------------- ----------------------------------------------------
5 00000 days 00:01:09 Successful login through Console (Username: Anonymous)
4 00000 days 00:00:14 System started up
3 00000 days 00:00:06 Port 1 link up, 100Mbps FULL duplex
2 00000 days 00:00:01 Spanning Tree Protocol is disabled
1 00000 days 00:06:31 Configuration saved to flash (Username: Anonymous)
DES-3800:4#
enable syslog
Purpose Used to enable the system log to be sent to a remote host.
Syntax enable syslog
Description The enable syslog command enables the system log to be sent to
a remote host.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To the syslog function on the Switch:
DES-3800:4#enable syslog
Command: enable syslog
Success.
DES-3800:4#
disable syslog