D-Link xStack DES-3800 Series, Руководство CLI

Страница: 21 / 326

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
16
IGMP Snooping : Disabled
TELNET : Enabled (TCP 23)
SSH : Disabled
WEB : Enabled (TCP 80)
RMON : Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show serial_port
Purpose Used to display the current serial port settings.
Syntax show serial_port
Description This command displays the current serial port settings.
Parameters None.
Restrictions
None
Example usage:
To display the serial port setting:
DES-3800:4#show serial_port
Command: show serial_port
Baud Rate : 9600
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DES-3800:4#
config serial_port
Purpose Used to configure the serial port.
Syntax config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] |
auto_logout [never | 2_minutes | 5_minutes | 10_minutes |
15_minutes]}
Description This command is used to configure the serial port’s baud rate and auto
logout settings.
Parameters
baud_rate [9600 | 19200 | 38400 | 115200]
−
The serial bit rate that will be
used to communicate with the management host. There are four options:
9600, 19200, 38400, 115200.
never
−
No time limit on the length of time the console can be open with
no user input.
2_minutes
−
The console will log out the current user if there is no user
input for 2 minutes.
5_minutes
−
The console will log out the current user if there is no user
input for 5 minutes.
10_minutes
−
The console will log out the current user if there is no user