D-Link TM DES-6500, Справочное руководство по интерфейсу командной строки

Страница: 20 / 267

4
B
ASIC
S
WITCH
C
OMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create account [admin|user]
<username 15>
config account <username>
show account
delete account <username>
show session
show switch
Show stack_information
show device_status
show serial_port
config serial_port auto_logout [never|2_minutes|5_minutes
|10_minutes|15_minutes]
enable clipaging
disable clipaging
enable telnet <tcp_port_number 1-65535>
disable telnet
enable web <tcp_port_number 1-65535>
disable web
save
reboot
reset {[config|system]}
login
logout
Each command is listed, in detail, in the following sections.
create account
Purpose Used to create user accounts
Syntax create account [admin | user] <username 15>
Description
The create account command is used to create user accounts that
consist of a username of 1 to 15 characters and a password of 0 to 15
characters. Up to 8 user accounts can be created.
Parameters Admin <username>
User <username>
Restrictions Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.