D-Link TM DES-6500, Справочное руководство по интерфейсу командной строки

Страница: 188 / 267

To add route redistribution settings:
DES-6500:4#create route redistribute dst rip src ospf all metric 2
Command: create route redistribute dst rip src ospf all metric 2
Success.
DES-6500:4#
delete route redistribute
Purpose Used to delete an existing route redistribute configuration on the switch.
Syntax
delete route redistribute [dst [rip|ospf] src [rip|static|local|ospf]]
Description This command will delete the route redistribution settings on this switch.
Parameters
dst
−
Allows the selection of the protocol on the destination device.
src
−
Allows the selection of the protocol on the source device.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To delete route redistribution settings:
DES-6500:4#delete route redistribute dst rip src ospf
Command: delete route redistribute dst rip src ospf
Success.
DES-6500:4#
config route redistribute dst ospf
Purpose Used to configure route redistribution from RIP to OSPF.
Syntax config route redistribute dst ospf src [static|rip|local] ospf {mettype
[1 | 2] | {metric <value 0-16777214>}
Description
Route redistribution allows routers on the network
−
that are running
different routing protocols to exchange routing information. this is
accomplished by comparing the routes stored in the various router’s
routing tables and assigning appropriate metrics. This information is
then exchanged among the various routers according to the individual
routers current routing protocol. The switch can redistribute routing
information between the OSPF and RIP routing protocols to all routers
on the network that are running OSPF or RIP. Routing information
entered into the Static Routing Table on the local switch is also