D-Link TM DES-6500, Справочное руководство по интерфейсу командной строки

Страница: 143 / 267

DES-6500
show 802.1x auth_state
Backend State: Request|Response|Fail| Idle|Initalize|Success |Timeout
−
Shows the current state of the Backend Authenticator.
Port Status: Authorized|Unauthorized
−
Shows the result of the
authentication process. Authorized means that the user was
authenticated, and can access the network. Unauthorized means that
the user was not authenticated, and cannot access the network.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the 802.1x auth state:
DES-6500:4#show 802.1x auth_state
Command: show 802.1x auth_state
1:4 ForceAuth Success Authorized
1:11 ForceAuth Success Authorized
2:2 ForceAuth Success Authorized
2:6 ForceAuth Success Authorized
Port Auth PAE State Backend State Port Status
------ ----------------------- --------------------- -----------------
1:1 ForceAuth Success Authorized
1:2 ForceAuth Success Authorized
1:3 ForceAuth Success Authorized
1:5 ForceAuth Success Authorized
1:6 ForceAuth Success Authorized
1:7 ForceAuth Success Authorized
1:8 ForceAuth Success Authorized
1:9 ForceAuth Success Authorized
1:10 ForceAuth Success Authorized
1:12 ForceAuth Success Authorized
2:1 ForceAuth Success Authorized
2:3 ForceAuth Success Authorized
2:4 ForceAuth Success Authorized
2:7 ForceAuth Success Authorized
2:8 ForceAuth Success Authorized
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
config 802.1x capability
Purpose Used to configure the 802.1x capability of a range of ports on the
switch.
Syntax
config 802.1x capability ports [<portlist>|all] [authenticator|none]
Description The config 802.1x command has four capabilities that can be set for
each port. Authenticator, Supplicant, Authenticator and Supplicant, and